For the first part of this process and a little back story, see Part 1…

Once Jonas Ranson at paperHAUS had screen printed each panel during the summer of 2020 it was down to me to assemble them. Each sheet was 18″ x 18″, sadly not large enough to fold round into a full LP sleeve, so each panel had to be trimmed to a 12” x 12” size and painstakingly glued to each already printed sleeve – 300 of them.

I’d specified that the designs be printed dead centre of each pattern to take advantage of the symmetrical nature of the cover graphic so there were lots of offcuts (which will be used somehow on future projects).

This was all done sometime during the Autumn of 2020 in my studio while we waited for the vinyl to come back from the pressing plant. The original plan had been for Colin at Castles in Space and I to then rent a bigger space for a day and glue the foil panels to each sleeve but I quickly realised that this just wasn’t going to be possible in such a short time. The next lockdown put a stop to any thoughts of that anyway.

Eventually the vinyl turned up and Colin arrived one evening with 17 boxes of covers in the back of his car and, in a socially distanced handover, I hauled them up to my studio.

Just after the Xmas period, during the 3rd lockdown, I began the extremely long task of gluing a panel to each sleeve, padding every cover out with a card square then laying them between newsprint sheets to avoid anything sticking while drying. The glue would start to curl the card within about a minute as it dried and started to contract so it was imperative to press them flat under weights.

I could average two boxes of 17 a day in two shifts by the end; one box first thing in the morning then leave to dry. Once stuck they were inspected for marks, sleeved in PVC outers and then boxed. Clean the area, do another box before bed and leave to dry in a stack overnight. By the end I could do one box in under 50 minutes, below is the last box on the 8th or 9th day.

As a nod to the site of the original performance recordings at the Museum of London, with moon rock bean bags and a space travel theme, we decided on a silver and black hybrid moon surface effect for the vinyl. The whole process of making the sleeves probably took longer than the whole album but I couldn’t be happier with the results, I doubt it’ll see a repress in this state as I’m told the foil stocks are virtually gone now but it was worth it.

Hyperspace


Spiral

Starburst


Cross

Swirls